Husqvarna LC 247Li Workshop Manual page 10

a) On LC 347VLi and LC 247Li: The green LED (B)
comes on.
A
B
The two bars of the battery indicator come on
and show the levels of the 2 batteries. After 2-3
seconds the battery indicator for the battery not
in operation goes off. The bar of the battery in
operation is shown for a longer time.
b) On LC 247iX, LC 347iVX and LC 353iVX: The
display comes on. The battery indicator (B)
shows the battery charge of the 2 batteries. The
number of the battery that operates is shown
adjacent to the battery indicator. The display
also shows the set speed.
B
A
6. Loosen the start inhibitor.
10 - Prepare and do servicing on the product
7. Push the motor brake handle in the direction of the
handlebar.
3.3.2 To use the drive on the wheels
• Pull the drive bail in the direction of the handlebar to
start the drive.
• Push + and - on the control panel to set the drive
speed in 4 steps.
a) On LC 347VLi:
b) On LC 347iVX and LC 353iVX:
• Release the drive bail to disengage the drive, for
example when you go near an obstacle.
361 - 001 -