Burner Description; Overall Dimensions - Riello P 200 P/G Series Installation, Use And Maintenance Instructions

11
D2576
2 3
1
1 - Suction line
2 - Pump pressure adjustment screw
3 - Return line
4 - Manometer plug (G 1/4)
5 - Vacuometer plug (G 1/4)
6 - Reset push-button of the motor overload relay
7 - Wiring terminal board
8 - Control box reset push-button and lock-out lamp
9 - Cable clamps
10 - Rod for combustion head shifting
* It is possible with a spacer, upon request
The output of the burner during the operation varies from a maximum and a minimum value.
The max. output should be inside of the operating field, see drawing below.
The minimum output may decrease up to 50 kg/h.
5481

BURNER DESCRIPTION

12
4 5

OVERALL DIMENSIONS

13
14
19 7
6 8 9
11 - Air regulating cam
12 - Servomotor
13 - Modulating controller (only for modulating)
14 - Ignition transformer
15 - Return pressure adjusting eccentric
16 - Pressure switch
17 - Manometer on return line
18 - Manometer on supply line
19 - Electric board
2
GB
15
16 17
18
10
Fig. 1
D2699