Getting Started; Sat-Fi2 Default Username & Passwords; Step 1 - Charge The Sat-Fi2; Step 2 - Install The Sat-Fi2 App On A Smartphone - Globalstar Sat-Fi2 User Manual

GETTING STARTED

The following instructions are for iOS and Android users only. If you are not an iOS or Android user, please visit
Globalstar.com/Sat-Fi2Support for setup instructions.
Sat-Fi2 Default Username & Passwords
• Sat-Fi2 Wi-Fi
○ Wi-Fi name: satfi2_XXXXXX
○ satfi1234
Password:
• Sat-Fi2 Admin
○
Username: admin
○ Password: admin
Step 1 – Charge the Sat-Fi2
The Sat-Fi2 must have a sufficient charge before it can be configured for use.
Perform the following steps to charge the Sat-Fi2 battery:
1. Remove the protective cover from the Power Port. Screw in the 12V
DC Power Adapter until it is all the way flush.
2. Plug the 12V DC Power Adapter to the wall. The Sat-Fi2 will perform
the power on cycle (the LEDs will blink in sequence), and then
begin charging.
3. For best results please leave the Sat-Fi2 connected to the charger
for at least 3 - 4 hours. The Power LED will turn solid
fully charged.
4. Remove the 12V DC Power Adapter from the External Power Port.
Then re-install the protective cover over the External Power Port.
NOTE: If while using the Sat-Fi2 the Power LED starts blinking RED, the battery
requires further charging.
Globalstar Sat-Fi2 User Guide
EXTERNAL POWER PORT
GREEN when
Step 2 – Install the Sat-Fi2 App on a Smartphone
1. Using an Internet or cellular connection, download and install the Sat-Fi2 App from the Google Play
Store or the Apple Store.
Step 3 – Power on the Sat-Fi2 and Open the Sat-Fi2 App
1. Power on the Sat-Fi2.
2. Ensure the smartphone has a cellular or Wi-Fi Internet connection.
3. Open the Sat-Fi2 app by selecting
Sat-Fi2
NOTE: The Sat-Fi2 App will download a few files necessary for
setup/configuration. Do not close the Sat-Fi2 App during the process.
.
Page 3