Attaching Images To An Email; Hibernation Mode - Globalstar Sat-Fi2 User Manual

Attaching Images to an Email

Follow steps 1 – 4 from Composing and Sending Email
For Android:
1. Select to choose the image
(NOTE: The bottom left lets the user take a photo with the camera; bottom right lets the user choose
from existing photos.)
2. Once a photo is selected, there is an option to rotate as well as changing the pixel size.
3. Select the check mark at the top right corner of the app to attach the photo to the email
For iPhone:
1. Select Attach Image
2. Tap on Select a Photo. The photos can be selected from the camera or from the phone's Photo Library
3. If needed, adjust the size. Select resize & Compress
4. Image will be attached to the email

Hibernation Mode:

As a default setting, the Sat-Fi2 will go into hibernation mode after 15 minutes of no activity. During hibernation, the
Sat-Fi2 will power off the satellite modem to increase battery life.
NOTE: Hibernation mode does not affect voicemail. Hibernation shuts down a lot of processes to save
battery and also prevents the user from receiving calls, messages, and push notifications.
The hibernation timer can be configured from the settings menu in the web console.
When the Sat-Fi2 is in hibernation mode, the power LED performs a dimming blink in orange and green colors.
To wake up the Sat-Fi2 from hibernation mode, access the app and a notification will be displayed showing that
the Sat-Fi2 is waking up from hibernation. You will also see the green lights scrolling through the Sat-Fi2 LED's.
Additionally, pressing the power button for 3 seconds will start the power off sequence.
NOTE: To initiate S.O.S. while in hibernation mode, press and hold down the S.O.S. button until the LED's start
flashing. This will wake up the device and initiate S.O.S. once a connection has been established.
Globalstar Sat-Fi2 User Guide
Page 20