Getting Started; Sat-Fi2 Ras Default Username & Passwords; Step 1 - Install The Sat-Fi2 Ras; Vehicle Installation - Globalstar Sat-Fi2 User Manual

GETTING STARTED

The following instructions are for iOS and Android users only. If you are not an iOS or Android user, please visit
Globalstar.com/Sat-Fi2RASSupport
Sat-Fi2 RAS Default Username & Passwords
• Sat-Fi2 RAS Wi-Fi
○
Wi-Fi name:
○
Password:
• Sat-Fi2 RAS Admin
○
Username:
○
Password:
Step 1 – Install the Sat-Fi2 RAS

VEHICLE INSTALLATION

1. Mount the Helix Antenna on top of the vehicle.
2. Mount the GPS antenna on top of the vehicle. (The
GPS Antenna must be at least 3 feet from the Helix
Antenna.)
3. Connect the Coaxial Antenna Cable to the Helix
Antenna pigtail cable. (Use coaxial sealant, shrink-
wrap tubing, electrical tape, or other suitable
products to seal the external cable connections to
prevent moisture & corrosion damage.)
NOTE: Do not kink or pinch Coaxial Antenna
and GPS Antenna cables when brought
through doors or windows. Coaxial Antenna Cable
LMR-100 Bend Radius = 0.25 in
4. Connect the Coaxial Antenna Cable to the RX and
TX ports on the Sat-Fi2 RAS.
5. Connect the GPS Antenna Cable to the GPS port on the
Sat-Fi2 RAS.
6. Connect the Wi-Fi Antenna to the Wi-Fi port on the
Sat-Fi2 RAS.
7. Connect the Power cable to the Power port on the
Sat-Fi2 RAS.
Sat-Fi2 Desktop App User Guide
for setup instructions.
satfi2_XXXXXX
satfi1234
admin
admin
Wi-Fi Antenna
Magnetic Mount
1
Helix Antenna
2
3
Coaxial Antenna Cable
Sat-Fi2 RAS
WiFi
5
GPS
Sat-Fi2 RAS
SOS
12VDC
7
Car Power Adapter
Magnetic Mount
GPS Antenna
4
Rx
Tx
GPS Antenna Cable
Page 4