S.o.s./Geos; Initiating An S.o.s; S.o.s. From The Device; S.o.s. From The Sat-Fi2 App - Globalstar Sat-Fi2 User Manual

S.O.S./GEOS

IMPORTANT: S.O.S. MODE SHOULD ONLY BE USED DURING LIFE THREATENING EMERGENCIES.
SENDING FALSE S.O.S. MESSAGES MAY SUBJECT YOU TO LIABILITY FOR ADDITIONAL CHARGES.
Activate the S.O.S. mode to begin communicating and sending alerts directly to GEOS International Emergency
Response Coordination Center (IERCC). GEOS will notify the appropriate emergency responders based on your
Sat-Fi2's GPS location and your emergency situation. Responders may include local police, Coast Guard, or Search
and Rescue teams. Please note that you may be liable for expenses related to your rescue.
Once S.O.S. is initiated, the Sat-Fi2 will continuously send GEOS your GPS position every 5 minutes until the S.O.S.
is canceled or the device is powered off. While S.O.S. is active, the Sat-Fi2 should remain

Initiating an S.O.S.

S.O.S. FROM THE DEVICE

Perform the following steps to initiate an S.O.S. from the Sat-Fi2 device:
1. Ensure the following:
• The Sat-Fi2 is outside with a 360° clear view of the sky
with no obstructions (buildings, trees, etc.)
• The Sat-Fi2 is powered on with the co-located antenna
fully extended in the up-right position
2. Open the Sat-Fi2 S.O.S. protective cover and press and hold the
S.O.S. button for 3 seconds until the S.O.S. LED blinks GREEN.
While the Sat-Fi2 is trying to establish a connection with GEOS,
the S.O.S LED will stay a solid GREEN. After a connection has
been established, the LED will do a double blink.
NOTE: If the Satellite LED is blinking RED, move the Sat-Fi2
to a location with a better view of the sky. Keep looking for a
better location until the Satellite LED starts to blink GREEN.
3. Once the Sat-Fi2's GPS location is determined, Sat-Fi2 will
send an S.O.S. notification with GPS location to GEOS every
5 minutes until the S.O.S. is cancelled or the Sat-Fi2 is
powered off.
Globalstar Sat-Fi2 User Guide

S.O.S. FROM THE SAT-FI2 APP

Perform the following steps to initiate an S.O.S. from the Sat-Fi2 App:
1. From the Sat-Fi2 App home screen select the S.O.S.
2. Press and hold the white circle, slide from left to right to unlock, and follow the on-screen instructions.
NOTE: While S.O.S. is active, the Sat-Fi2 must remain outside where it has a 360º clear view
of the sky with no obstructions in order to maintain network connectivity.
3. Sat-Fi2 will then enable you to talk or text with GEOS IERCC via the Sat-Fi2 App.
Android iPhone
Page 21