Table of Contents
Advertisement
G
S
ETTING
TARTED
The following instructions are for iOS and Android users only. If you are not an iOS or Android user, please visit
Globalstar.com/Sat-Fi 2Support for setup instructions.
Sat-Fi2 Default Username & Passwords
Sat-Fi2 Wi-Fi
o
Username:
No username by default
o
Password:
satfi1234
Sat-Fi2 Admin
o
Username:
admin
o
Password:
admin
Step 1 Charge the Sat-Fi2
The Sat-Fi2 must have a sufficient charge before it can be configured for use. Perform the following steps to charge
the Sat-Fi2 battery:
1.
Remove the USB Data/Power Port cover by turning the D-Ring screws
counter-clockwise. Place the USB Data/Port cover in a secure location.
2.
Connect the Micro USB Data/Power Cable to the Sat-Fi2 USB
Data/Power port and plug into either a computer or the AC Power
Adapter (included in the box.) The Sat-Fi2 will perform a self-test (the
LEDs will blink in a right-to-left then left-to-right sequence) If the Power
LED is blinking RED, the battery requires further charging.
3.
Let the Sat-Fi2 charge until the Power LED turns Solid GREEN.
4.
Disconnect the Micro USB Data/Power Cable and re-connect the USB
Data/Power cover on the Sat-Fi2 by turning the D-Ring screws
clockwise.
NOTE:
The USB/Data Power Port cover needs to be properly installed
to ensure water resistant integrity.
Globalstar Sat-Fi2 User Guide
Step 2 Install the Sat-Fi2 App on a Smartphone
1.
Using an Internet or cellular connection, download and install the Sat-Fi2 App from the Google Play
Store or the Apple Store.
Step 3 Power on the Sat-Fi2 and Open the Sat-Fi2 App
1.
Power on the Sat-Fi2.
2.
Ensure the smartphone has a cellular or Wi-Fi Internet connection.
3.
Open the Sat-Fi2 app by selecting
NOTE: The Sat-Fi2 App will download a few files necessary for
setup/configuration. Do not close the Sat-Fi2 App during the
process
.
Sat-Fi
Page 3
Advertisement
Table of Contents
