SAT-FI2 OVERVIEW
Sat-Fi2 at a Glance
•
Co-Located Antenna – Must be fully extended and pointing straight to the sky for optimal performance
Power LED – Displays Power status
•
Satellite LED – Displays Satellite connectivity status
•
•
S.O.S. LED – Displays S.O.S. status
•
USB Power/Data Port
○
Remove cover to access USB Power/Data Port
○
Use port to charge the battery and connect to AC Power Adapter
•
External Power Port – Use with 12V charger (coming soon)
Power Button
•
○
Power On – Press and hold for 1 second
○
Power Off – Press and hold for 3 seconds
•
S.O.S. Button
○
Initiate S.O.S. with GEOS – Press and hold S.O.S. button until S.O.S. LED blinks
○
Cancel S.O.S. with GEOS – Press and hold the S.O.S. button until S.O.S. LED blinks
Globalstar Sat-Fi2 User Guide
Sat-Fi2 LEDs
LED STATUS
POWERING ON
POWERING OFF
OPERATIONAL/STATUS
POWERED ON
POWERED OFF
BATTERY FULL
BATTERY CHARGING ON
BATTERY CHARGING OFF
BATTERY < 25%
CONNECTED TO SATELLITE
NOT CONNECTED
TO SATELLITE
S.O.S. CONNECTING MODE
S.O.S. ESTABLISHED MODE
CANCEL S.O.S. MODE
HIBERNATION MODE
POWER BUTTON
S.O.S. BUTTON
USB DATA PORT
LED Pattern Definitions
•
Normal blink: Blinks in slow rate
•
Fast blink: Blinks in fast rate
Double blink: Blinks twice and off
•
•
Forward Reverse: The boot up LED pattern scrolls green from the power to the S.O.S. then all 3-blink green
GREEN
•
Solid ON: Stays ON continuously
RED
•
Power Mode dimming: LED slowly dims / turns OFF & turns ON / slowly brightens in slow smooth pace
POWER LED
SATELLITE LED
All Green LEDS Blink in Forward/Reverse Direction until Sat-Fi2 Powers On
Fast Blink Orange
Fast Blink Orange
Normal Blink Green
N/A
No LED
No LED
Solid Green
N/A
Double Blink Green
N/A
Slow Blink Green
N/A
Fast Blink Red
N/A
N/A
Normal Blink Green
N/A
Normal Blink Red
N/A
N/A
N/A
N/A
N/A
N/A
Green + Orange
No LED
(Bright/Dims/Off)
Press the Power button to turn the Sat-Fi2 on.
Press and hold the Power button down until all
The LEDs will light up, notifying you that the
the LEDs start flashing orange. The device will
device is on.
Press and hold the S.O.S. button until the
While S.O.S. is active, press and hold the
S.O.S. LED turns green to initiate an S.O.S. with
S.O.S. button until the S.O.S. LED turns red to
GEOS IERCC.
cancel S.O.S. with GEOS IERCC.
Connect the USB Data Cable to connect the Sat-Fi2 to a computer.
S.O.S. LED
Fast Blink Orange
N/A
No LED
N/A
N/A
N/A
N/A
N/A
N/A
Solid Green
Normal Blink Green
Normal Blink Red
No LED
then power off.
Page 7