Step 5 - How To Make A User An Admin - Globalstar Sat-Fi2 User Manual

Step 5 – How to make a user an Admin
To update the firmware on your Sat-Fi2, it is necessary to give admin privileges to a user.
Perform the following steps to make a Sat-Fi2 user an admin:
1. Open a web browser
2. In the address bar enter:
http://192.168.1.1 or http://192.168.0.1
3. A Sat-Fi2 login screen will be displayed.
In the Username field, enter the Admin Username
•
(Default is admin)
• In the Password field, enter the password (Default is admin)
• Select the Login button.
4. The Sat-Fi2 Admin Console screen will be displayed.
5. Select Users
6. The list of users will be shown. Then select the pencil icon next to the user you would like to
make an admin.
7. The Account Info will appear. Select Admin User
8. Select Save
9. You can verify a user has been made an admin by looking at the checkmark next to the username.
Globalstar Sat-Fi2 User Guide
Page 5