6 COMPONENTS
6.3 Side Leg Panels - Left / Right
Remove the side leg panels to gain access to:
•
switch(es), wiring, and ignition module(s) (R-SIDE)
•
transformer and terminal block (240V unit) (R-SIDE)
•
wire connections to main power (R-SIDE)
•
side manifold and solenoids (L-SIDE)
•
connections to the gas pressure regulator (L-SIDE)
To remove a side leg panel:
WARNING
Remove all power supplies to the unit before opening panels for
servicing.
IMPORTANT
i
When removing the RIGHT Side Leg Panel, ensure you slide the panel out gently
without disconnecting any wire connections accidentally.
IMPORTANT
i
To avoid pinching any wire, tuck all the wires safely away before sliding the panel
back in.
1. Take out the grease pan(s).
2. Remove the 2 screws, at the front, on the inside face of the foot
3. To dislodge the panel from the tabs at the back, pull the panel straight forward.
1
A 36" Model Shown
(CONT.)
Page 17 | HEEGM Service Manual part# 4532502 (Rev 0)
3
2
2