AlphaStation System Firmware
Table 8-1. AlphaStation Series System SROM Code Actions
Indicator Values
Bit 7
l l l l
l l l l
l l l l
l l l l
l l l l
l l l l
l l l l
l l l l
l l l l
l l l l
l l l l
l l l l
l l l l
l l l l
l l l l
l l l l
1
The filled-in circle (
8-4
1
Hex
Meaning
Bit 0
Value
l l l l
FF
Initialize CPU (BIU_CTL and ABOX registers
initialized).
l l l ¡
FE
Initialize bank 8 logic.
Executing memory sizing code.
l l ¡ l
FD
Memory sizing completed.
Configuring memory.
l l ¡ ¡
FC
Memory configuration successful.
Bcache initialization started.
Initializing all memory to zeroes.
l ¡ l l
FB
Bcache initialization successful.
Bcache references OFF and Dcache OFF.
Initialize the low 8MB of memory to zero.
Executing memory test 1 of 4.
l ¡ l ¡
FA
Memory test 1 of 4 complete.
Executing memory test 2 of 4.
Bcache references ON and Dcache OFF.
l ¡ ¡ l
F9
Memory test 2 of 4 complete.
Executing memory test 3 of 4.
Bcache references OFF and Dcache ON.
l ¡ ¡ ¡
F8
Memory test 3 of 4 complete.
Executing memory test 4 of 4.
Bcache references ON and Dcache ON.
¡ l l l
F7
Memory test 4 of 4 complete.
¡ l l ¡
F6
Initialize the core logic registers.
¡ l ¡ l
F5
Reserved for future.
¡ l ¡ ¡
F4
Reserved for future.
¡ ¡ l l
F3
Load the DROM code into memory.
¡ ¡ l ¡
F2
DROM and flashROM corrupted
¡ ¡ ¡ l
F1
Successful load and checksum of DROM
¡ ¡ ¡ ¡
F0
Initialize registers required by console firmware
and the PAL_BASE and EXEC_ADDR registers.
l
) indicates that the LED is on, and the open circle (
¡
) indicates off.