Advertisement
Implementation
Configure and control the LEDs
The LEDs can be switched on/off by controlling the port pins to which they are connected using methods from
the iLLD headers IfxPort.h.
In the setup phase, the port pins connected to the LEDs are configured as push-pull output mode using the
function IfxPort_setPinMode().
During program execution, the LEDs are switched on and off using the function IfxPort_setPinState().
5
2019-10-17
Copyright © Infineon Technologies AG 2019. All rights reserved.
Advertisement
Need help?
Do you have a question about the CCU6 Interrupt 1 and is the answer not in the manual?