Figure 2-23 Connecting A Scsi Terminator To The Hsd10 Scsi Port - Digital Equipment VAX 4000 108 User Information

Getting Started
MLO-013668

Figure 2-23 Connecting a SCSI Terminator to the HSD10 SCSI Port

Connecting the TriLink Adapter to the optional KFDDA DSSI Port
The VAX 4000 108 comes with an optional KFDDA DSSI port in the third slot up from
the bottom of the I/O receiver and a TriLink adapter which is to be connected to it. The
DSSI port or a device connected to it must be terminated if you do not choose to use the
TriLink adapter.
To connect the TriLink adapter to the optional KFDDA DSSI port, follow these steps:
c
1. Seat the adapter onto the DSSI connector; it is keyed so that it can only be seated
right-side up.
2. Turn the thumbscrews clockwise to secure the adapter.
VAX 4000 Model 108 User Information 2-29