Figure 2-7 Connecting The Console Terminal - Digital Equipment VAX 4000 108 User Information

Getting Started
_________________________ NOTE____________________________
When the system is shipped, MMJ ports 0 and 1 are covered with an arrow
label identifying port 3 as the console port. When port 3 has been identified,
the OPA0 arrow label may be removed.
___________________________________________________________
Network Connection and Termination
Your VAX 4000 Model 108 System can be connected to either a ThinWire Ethernet or a
ThickWire Ethernet network. A jumper on the system board determines whether you are
using ThinWire or Thickwire Ethernet.
If you do not use an Ethernet network, you should install the ThinWire and ThickWire
terminators on the back of your system as shown in Figure 2-11 and Figure 2-10,
2-10 VAX 4000 Model 108 User Information

Figure 2-7 Connecting the Console Terminal

MLO-013669