Figure 2-16 Connecting The Scsi Terminator Or Cable - Digital Equipment VAX 4000 108 User Information

Getting Started
1. Connect the SCSI terminator or cable to the SCSI port on the rear of the system.

Figure 2-16 Connecting the SCSI Terminator or Cable

Connecting Peripherals to an Optional Asynchronous Port
There are two asynchronous communications options for Micro VAX 4000 108 systems:
•
DHW42-BB -- Provides two eight-line data-line-only asynchronous ports
•
DHW42-CB -- Provides two four-line asynchronous ports with modem control
If the system has the DHW42-BB asynchronous communications option installed, the
system has one or two eight-line data-only asynchronous ports. You can connect up to
eight peripherals to each of these ports using the H3104 harmonica.
To connect a peripheral to a DHW42-BB asynchronous port using the H3104 harmonica,
follow these steps:
1. Set the on/off switch on the peripheral to the off (O) position.
2-20 VAX 4000 Model 108 User Information
MLO-013675