Heading Select (Hdg) Mode - Honeywell KFC 150 Pilot's Manual

HEADING SELECT (HDG) MODE
To
operate in heading select mode:
1. Move the heading "bug" to the desired
heading on the PNI (using the HDG
knob).
2. Depress the HDG button on the KC
192 to engage the heading select
mode. The V-bar on the FCI will com-
mand a bank towards the selected
heading, in the direction of the short-
est turn. If the autopilot is engaged it
will turn the aircraft to intercept and fly
the heading.
3 .
The V-bar will continue to command
the bank necessary to maintain the
selected heading. If you move the
heading "bug" again while heading
select mode is engaged, the V-bar will
immediately command a turn to the
new heading. If the autopilot is
engaged, it will immediately turn the
aircraft in the direction of the new
heading. The HDG mode is canceled
when NAV or APR coupling occurs, or
when the HDG or FD mode button is
pushed again to "off".
NOTE: For system limitations refer to
the Flight Manual Supplement for your
particular aircraft.
(See page 24/25 for illustration)
19