Holding Pattern - Honeywell KFC 150 Pilot's Manual

1.
Approaching the
STL
VORTAC, the con-
troller asks you to hold southwest of the
VORTAC on the 244 degree radial, right
turns. You are now over the station with a
064 degree course selected (the
TOFROM indicator has swung to
'FROM'). Set your heading bug to the
reciprocal or outbound heading of 244
degrees for easy reference and begin
your right turn holding pattern.
2 . Halfway through the outbound turn, the
KI
525A display shows
t h e
deviation bar
behind the symbolic aircraft. You know,
therefore, that you must eventually fly
back to the radial in order to be on course
during the inbound leg of the holding pat-
tern.
3. Outbound, you are using the heading bug
as a reference for 244 degrees. The 244
degree radial is off the right wing and par-
allel to your outbound course.
4. Halfway through your turn to the inbound
064 degree course, the KI 525A shows
the symbolic aircraft approaching the
deviation bar at a right angle. By keeping
the top of the deviation bar on the lubber
line, you can complete your turn and roll
out precisely on course.
NOTE:
For system limitations refer to your
Flight Manual Supplement.
~
108