Honeywell KFC 150 Pilot's Manual page 63

N
A
Objective: Intercept the desired course and complete a 'direct to' operation after passing
waypoint 'B' while coupled to a Long Range Nav.
1. The aircraft is engaged in
Heading (HDG) and
Altitude Hold (ALT) mode.
A flight plan from waypoint
'A" to "B' to
' C '
is entered
in the Long Range Nav.
The course pointer is
selected to
0 9 0 '
and NAV
Arm is activated by press-
ing the NAV button. The
aircraft is heading 045" to
intercept the course. As
the course deviation bar
moves toward the center
position, NAV mode is cou-
pled and tracks the Long
Range Nav.
2. As the aircraft crosses way-
point ' B ' , the course pointer
must be rotated to reflect
the course or bearing to
the new active waypoint
(135" in this case).
3. The aircraft changes the
active waypoint
"D'
via a
'direct to' operation with the
Long Range Nav. The
course pointer must be
rotated to 225' to reflect
the bearing to
'D".
The
autopilot will then correctly
track the course to way-
point "D'.
NOTE: The course arrow on the KI 525A must be set at the
Desired Track or OBS setting indicated by the Long Range Nav.
Moving the course pointer does not affect movement or location
of the Lemight D-Bar. However, in order for the KAP 150 to
track the course, the proper course must be set in the HSI.
62