Usb/Audio Board - HP ProBook x360 11 G5 Education Edition Maintenance And Service Manual

USB/audio board

Table 5-8 USB/audio board spare part information
Description
USB/audio board (includes audio jack and USB port and rubber bumper)
Before removing the USB/audio board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
5. Remove the battery (see
Remove the USB/audio board:
1. Release the ZIF connectors (1) to which the USB/audio board cables are connected, and then disconnect
the USB/audio board cables from the system board.
2. Remove the two Phillips M2.0×4.4 screws (2) that secure the USB/audio board to the bottom cover.
3. Lift the right side of the USB/audio board (3) and swing it up and to the left to remove it.
Reverse this procedure to install the USB/audio board.
Keyboard/top cover on page
Battery on page 40).
Spare part number
L84410-001
29).
Component replacement procedures 47