Electrostatic Discharge; Preventing Electrostatic Discharge Damage - Avaya VSP 4450GSX-PWR+ Installing

4. 100/1000 Mbps SFP ports
5. 1/10G SFP + ports
6. Console Port
VSP 4450GSX-DC model
The VSP 4450GSX-DC model consists of:
1. 12 10/100/1000 Base TX RJ-45 ports
2. 36 100/1000 Mbps SFP ports
3. two 1/10G SFP + ports
Figure 2: VSP 4450GSX-DC
1. USB 2.0 port
Note:
The VSP 4450GSX-DC model does not require a USB device in the USB port for normal operation.
The USB port can be used for additional storage using USB memory stick.
No log messages are generated when you plug or unplug the USB from the VSP 4000 4450GSX-DC.
2. Switch LEDs
3. 10/100/1000 Base TX RJ-45 ports
4. 100/1000 Mbps SFP ports
5. 1/10G SFP + ports
6. Console Port

Electrostatic discharge

This section provides information and procedures to prevent electrostatic discharge during
installation.

Preventing electrostatic discharge damage

Electrostatic discharge (ESD) is a discharge of stored static electricity that can damage equipment
and impair electrical circuitry. Electrostatic voltages can result from friction including, pulling cabling
through conduits, walking across carpeted areas, and building static charge in clothing. When you
November 2016 Installing Avaya Virtual Services Platform 4450GSX-PWR+ Switch
Comments on this document? infodev@avaya.com
Electrostatic discharge
17