Check Light Emitting Diode (Led) On The Avaya Virtual Services Platform 4000; Front Panel Leds - Avaya VSP 4450GSX-PWR+ Installing

Installing the Avaya VSP 4000 4450GSX series
Stopping syslogd/klogd: no syslogd found; none killed
Sending all processes the TERM signal...
Sending all processes the KILL signal...
hwclock: can't open '/dev/misc/rtc': No such file or directory
/etc/rc0.d/S25save-rtc.sh: line 5: /etc/timestamp: Read-only file system
Unmounting remote filesystems...
Stopping portmap daemon: portmap.
Deactivating swap...
Unmounting local filesystems...
[695413.959234] Power down.
[695413.989531] System Halted, OK to turn off power
Check Light Emitting Diode (LED) on the Avaya Virtual
Services Platform 4000
The figures and tables in the following sections describe the LEDs on the Avaya Virtual Services
Platform 4000 switches. The tables describe LED operation for a switch that finishes the power-on
self-test.

Front panel LEDs

The following diagram illustrates the components on the front panels of the Avaya VSP 4000
4450GSX-PWR+ switch.
For detailed explanations of the states indicated by each front panel LED type, see the following
sections:
• Port LED state indicators
• Switch LED state indicators
Figure 7: VSP 4450GSX-PWR+
November 2016
on page 36
on page 35
Installing Avaya Virtual Services Platform 4450GSX-PWR+ Switch
Comments on this document? infodev@avaya.com
34