8Bsi Card - Samsung Office DECT 8000 Installation And Programming Manual

Champ Connector
The champ connector is used for connecting with DBSs.

8BSI Card

The 8BSI card can only be installed in a DCS system. The 8BSI card has more features and more
enhanced performance than the 4BSI card.
Each 8BSI card can connect up to eight DBSs and have 32 simultaneous calls (four per DBS).
!
48 DECT handsets can be registered to a single card.
!
You can easily download new software from a console terminal connected to the RS-232C
!
connector on the front panel of the card.
Power feeding of each port can be controlled remotely using the software.
!
The Watchdog timer prevents the system from operating abnormally due to voltage change.
!
The system monitoring feature is enhanced by using a manual reset switch and a non-
!
maskable interrupt reset switch.
The card is illustrated below and is installed as described in Chapter 4, Installation.
Champ Connector
The champ connector is used for connecting with DBSs.
RS-232C Connector
This 9-pin connector is used for connecting a console terminal to download the 8BSI card soft-
ware (see Chapter 6).
Front View
Champ connector
RS-232C connector
2–3