Samsung Office DECT 8000 Installation And Programming Manual page 40

2. Use a power drill to drill holes on the marks you just have made. The holes should be at least
35mm deep with a diameter of about 5.5mm so that you can insert the rawl plugs easily.
3. Hammer the rawl plugs into the drilled holes.
4. Align the wall-mount bracket on the screw holes and screw into position with a cross-head
screwdriver. Check that the wall-mount bracket is tightly secured to the wall.
Mounting on a Marble or Steel Wall Mounting on a Marble or Steel Wall
Mounting on a Marble or Steel Wall Mounting on a Marble or Steel Wall
1. Prepare a wooden board on which you can fix the wall-mount bracket. The board should be
larger than the bracket. Glue the board securely to the wall.
2. Place the wall-mount bracket against the board and screw into position with the cross-head
screwdriver. Ensure both the wall-mount bracket and board are tightly secured to the wall.
4–15