Processor Card Daughter Boards; Smartmedia Cards - Samsung OfficeServ 7200 General Description Manual

2.2.1 PROCESSOR CARD DAUGHTER BOARDS

There are four (4) types of daughter board that can fit on the MCP card. These daughter boards will only work on
the Main Control Processor (MCP). The various daughter boards and their uses are described below.
MULTI-FREQUENCY MODULE (MFM)
The MFM Module installs in the third position of the MCP.The main purpose of the MFM daughter board is to pro-
vide DSPs for DTMF and tone detection.
• Twelve (12) DSPs for DTMF and tone detection.
R2/CID-Tx MODULE (RCM2)
The RCM2 Module installs in the second position of the MCP.The main purpose of the RCM2 daughter board is to
provide Caller ID decoders for use with that telephone company provided service over analog trunks. A second-
ary use of the RCM is to provide R2 MFC senders and receivers to the system although these are not used in the
US. The system can support only one (1) RCM2 card.
The RCM2 consists of the following:
• Fourteen (14) CID receivers (for use with Caller ID on analog trunks).
• Sixteen (16) CID senders (to pass Caller ID from trunk to single line port).
MISCELLANEOUS FUNCTION MODULE (MIS)
The Miscellaneous Function Module (MIS) daughter board installs in the first position on the MCP card. The MIS
daughter board is used to provide external music on hold/audio inputs (radios, digital announcers, etc.), external
paging auto output, loud bell, common bell and programmable dry contact closures. Only one MIS per system is
allowed.
The MIS consists of the following:
• Two (2) external music/audio inputs
• One (1) external paging audio output
• One (1) loud bell audio output
• One (1) common bell relay contact closure
• Two (2) software programmable relay contact closures

2.2.2 SMARTMEDIA CARDS

An OfficeServ 7200 system must have a SmartMedia card installed in the main control processor (MCP) as the
SmartMedia card contains the system operating software. The SmartMedia card can also be used to store a back-
up customer database to supplement the database stored on the MCP card. In addition the SmartMedia card can
store backup copies of the operating software for the LCP, and TEPRI cards.
2.2