Chapter 4
4–16
Installation
Fixing a DBS on the Wall-Mount Bracket
Before you fix the DBS to the wall-mount bracket, be sure that you have already connected the
RJ-45 cable to the rear of the DBS. This is described in the previous section, Connecting BSI Card
and DBS.
There are two grooves on the back of the DBS unit that fix to the bracket. These are circled in the
diagram below.
The grooves align with the two fixing tabs on the wall-mount bracket.
Align the grooves of the DBS with the bracket tabs and gently pull down the DBS to engage the
tabs. Ensure the DBS is securely fixed to the bracket.