wiPEr blaDEs
1
To access the wiper blades, stand on
step 1.
note: the step may be slippery.
replacing windscreen wiper
blades 2
– Lift wiper arm 4;
– move the blade into a horizontal po-
sition;
5.38
3
4
5
b
a
– press tab 3 and slide the wiper blade
downwards to release hook 5 from
the wiper arm;
– slide the blade (A) then lift it (B) to
release it.
refitting
To refit the wiper blade, proceed in the
reverse order to removal. Make sure
that the blade is correctly locked in po-
sition.
Check the condition of the wiper
blades. You are responsible for their
service life:
2
– clean the blades and the wind-
screen regularly with soapy
water;
– do not use them when the wind-
screen is dry;
– free them from the windscreen
when they have not been used
for a long time.
– In frosty weather, make
sure that the wiper blades
are not stuck by ice (to
avoid the risk of the motor
overheating).
– Check the condition of the wiper
blades.
Replace the wiper blades as soon
as they begin to lose efficiency
(approximately once a year).
Whilst changing the blade, take care
not to drop the arm onto the window
after it has been removed as this
may break the window.
Need help?
Do you have a question about the MASTER and is the answer not in the manual?