Handbrake - Renault MASTER User Manual

hanDbrakE

2
handbrake
To apply:
Pull lever 1 upwards. Check that the
vehicle is immobilised. The warning
}
light on the instrument panel will
come on.
To release:
Pull lever 1 up slightly, press button 2
and then lower the lever to the floor.
}
The warning light on the instru-
ment panel will go out.
2.16
Make sure that the hand-
brake is properly released
when driving (red indicator
light off), otherwise over-
heating, or even damage, may
occur.
1
When
stopped, depending on the
gradient and/or the vehicle
load, it may be necessary to
apply the handbrake by at least two
further notches and engage a gear
(1 or reverse).
st
An impact to the underside
of the vehicle (e.g.: striking
a post, raised kerb or other
street furniture) may result
in damage to the vehicle (e.g.: de-
formation of an axle).
To avoid any risk of accident, have
your vehicle checked by an ap-
proved Dealer.
the vehicle is
Pull-up handbrake
(depending on the vehicle)
To apply:
Pull lever 4 upwards then release it. It
returns to the horizontal position.
To release
Press button 3 and pull lever 4 upwards
then place it in a horizontal position.
4
3