Parking The Vehicle - Renault MASTER User Manual

sEQUEnTial gEarbox
operation in automatic mode
Automatic mode is selected by default
every time the ignition is switched on.
The letter D appears on the display.
The vehicle is controlled using the ac-
celerator and the brake. Gears will
change automatically at the correct
moment and at a suitable engine speed
because the automatic mode takes the
road surface and the chosen driving
style into consideration.
Gears may be shifted manually in this
mode. Pushing the lever forwards
or backwards shifts a gear upwards
(except if there is a risk of underrev-
ving) or downwards (except if there is a
risk of overrevving).
The oil level in the automatic gear-
box system reservoir varies depend-
ing on use. Adding oil is strictly
forbidden (except by qualified ap-
proved network personnel).
2.62
(4/5)
note: automatic mode takes account
of:
– the position and speed of depression
of the accelerator pedal to assess
driving style and select the optimum
gear;
– action on the brake pedal, to com-
mence engine braking in preparation
for a downshift.
You can stop the vehicle at red lights,
with the gear engaged, by depressing
the brake pedal; there is no need to
change to neutral (n).
The vehicle will move off again:
– either slowly, if you release the brake
without accelerating (e.g. when in a
traffic jam);
– or quickly, if you release the brake
and accelerate.
accelerating and overtaking
– Slowly depress the accelerator pedal
to accelerate gradually;
– to obtain maximum vehicle per-
formance regardless of the mode
selected (automatic or manual),
quickly depress the accelerator
pedal beyond the kickdown point.
The speed with which you depress the
pedal will allow you to downshift ac-
cording to the vehicle's capabilities.

Parking the vehicle

It is possible to park in gear (for exam-
ple, on a slope):
– with the ignition on, select a gear
with your foot on the brake;
– check that a gear other than n is dis-
played on the instrument panel, then
remove the ignition key;
– apply the handbrake.
To disengage the gear, switch on the
ignition without starting the engine and
shift the selector lever to neutral with
the brake pedal depressed. Check
that n is displayed on the instrument
panel.