Characteristics Of Electromagnetic Brake - Mitsubishi Electric Melservo-Jet HG-SNS Series User Manual

6.3

Characteristics of electromagnetic brake

Before operating the servo motor, confirm that the electromagnetic brake operates properly.
The operation time of the electromagnetic brake varies depending on the power supply circuit being used.
Check the operation delay time with an actual machine.
The characteristics of the electromagnetic brake provided for the rotary servo motor with an electromagnetic brake are shown
below.
Item
*1
Type
*4
Rated voltage
Power consumption at 20 °C [W]
*6
Coil resistance [Ω]
*6
Inductance [H]
Brake static friction torque
*2
Release delay time [s]
Braking delay time [s]
Permissible braking work [J]
Brake looseness at servo motor shaft
*3
Brake life
Selection example of surge
*6
absorbers to be used
*1 This type does not have a manual release mechanism. Use a 24 V DC power supply to release the brake electrically.
*2 The value for initial on gap at 20 °C.
*3 Brake lining wear due to braking will increase the brake gap, but the gap is not adjustable. Therefore, the brake life indicates the number
of times the brake can be applied before gap adjustment becomes necessary.
*4 Prepare a power supply exclusively for the electromagnetic brake.
*5 The values are design values. These are not the guaranteed values.
*6 Select the electromagnetic brake control relay properly, in consideration of the characteristics of the electromagnetic brake and surge
absorber. When a diode is used as a surge absorber, the electromagnetic braking time becomes longer.
*7 The value of the brake static friction torque is the lower limit in the initial state at 20 °C.
6 HG-KNS SERIES
64
6.3 Characteristics of electromagnetic brake
*7
[N•m]
*2
DC off
Per braking
Per hour
*5
[degree]
Number of braking times [times]
Work per braking [J]
For the suppressed voltage 125 V
For the suppressed voltage 350 V
HG-KNS series
13B_ 23B_
Spring actuated type safety brake
24 V DC (-10 % to 0 %)
6.3 7.9
91.0 73.0
0.15 0.18
0.32 or more 1.3 or more
0.03 0.03
0.01 0.02
5.6 22
56 220
2.5 1.2
20000
5.6 22
TND20V-680KB (Manufactured by Nippon Chemi-Con Corporation)
TND10V-221KB (Manufactured by Nippon Chemi-Con Corporation)
43B_ 73B_
10
57.0
0.13
2.4 or more
0.04
0.02
64
640
0.9
64