Mr-J3Jscbl03M-_-L - Mitsubishi Electric Melservo-Jet HG-SNS Series User Manual

MR-J3JSCBL03M-_-L

These cables are motor cables for the HG-KNS series rotary servo motors. The servo amplifier and the rotary servo motor
cannot be connected by these cables alone. The servo motor-side encoder cable (MR-J3ENSCBL_M-_) is required.
Model
The following describes what each block of a model name indicates. Not all combinations of the symbols are available.
M R - J 3 J S C B
Connection of servo amplifier and rotary servo motor
CN2
*1 For details of this cable, refer to the following.
Page 50 MR-J3ENSCBL_M-_
5 WIRING OPTION
44
5.2 Encoder cable/connector sets
L 0 3 M - A 1 - L
Bending life
Symbol
L
Cable direction
Symbol
A1
A2
Cable length
Symbol
03
Servo amplifier
Bending life
Standard
Cable direction
Load-side lead
Lead in opposite direction of load side
Cable length [m]
0.3
*1
MR-J3ENSCBL_M-_
MR-J3JSCBL03M-A1-L
(2)
Rotary
servo motor
(1)
or
MR-J3JSCBL03M-A2-L
(2)
Rotary
servo motor
(1)