Table of Contents
Advertisement
The date/time/zone must be set to enable normal camera temperature
z
control. Once the date/time/zone are set, temperature warnings can be
displayed correctly.
If [Overheated! Shutting down.] is displayed, turn off the camera and
z
wait at least 5 min. Note that the camera should be off for 20 min. or
more if you will record a 4K movie up to 9 min. 59 sec. or a high frame
rate movie up to 7 min. 29 sec. (Actual movie recording times may be
shorter, depending on the recording environment and conditions of
use.)
Image quality is poor.
Image quality may decline if you shoot while the camera's internal
z
temperature is high.
Shots are out of focus.
Confirm that unneeded functions such as macro are deactivated.
z
Try shooting with AF lock.
z
No AF points are displayed and the camera does not focus when the shutter
button is pressed halfway.
To have AF points displayed and the camera focus correctly, try
z
composing the shot with higher-contrast subject areas centered before
pressing the shutter button halfway (or pressing it halfway repeatedly).
Subjects in shots look too dark.
Adjust brightness by using exposure compensation.
z
Use AE lock or spot metering.
z
Subjects look too bright, highlights are washed-out.
Adjust brightness by using exposure compensation.
z
Use AE lock or spot metering.
z
Reduce the lighting on subjects.
z
310
Advertisement
Table of Contents
