Canon PowerShot G7 X Mark III Advanced User's Manual page 284

You can assign [Exposure compensation] functionality to the
z
adjust exposure compensation with the
Controls setting screen, choose [
the exposure compensation dial to the [ ] position.
In mode with the exposure compensation dial set to [ ] and the
z
and dial set to [STD], exposure compensation can be adjusted with the
dial while the metering timer is running.
Options you can set with the
z
(whether the camera is in
To restore [Custom Controls] defaults, choose
z
settings] → [Custom Controls] → [OK].
Some functions you configure may not apply (may be disabled) in Movie
z
mode.
Options you can set when [STD] is assigned
Items
ring
dial
* When the ring is not assigned to [STD] but the
the dial to set Program Shift in
aperture value in
* When the dial is assigned to [STD] in
shutter speed (or aperture value) when the
[ ]).
/
Settings
STD Program shift
STD
mode.
dial, choose [ ] on the Custom
], return to the shooting screen, and set
ring vary depending on the shooting mode
/ / mode, or
[Reset camera] → [Other
Shooting Modes
Shutter
speed
― ―
mode, shutter speed in
/ mode, you can use it to set
ring is assigned to [
284
ring. To
ring
/ mode).
Aperture
value
―
dial is, you can use
mode, or
] (or