Table of Contents
Advertisement
When using auto image transfer, ensure that the battery pack has sufficient
z
charge. Power saving on the camera is deactivated during image transfer.
Any images captured after auto image transfer are not sent to the
z
computer then. They are sent automatically when the camera is restarted.
If auto image transfer to a computer does not begin automatically, try
z
restarting the camera.
To stop sending images automatically, choose [Auto send images to
z
computer] → [Auto send] → [Disable].
Images are not sent to a computer automatically while connected via USB
z
(including connection to PD-E1).
239
Advertisement
Table of Contents
