Table of Contents
Advertisement
Use memory cards with enough free space (4 GB or more).
z
SD Speed Class 10 or higher memory cards are recommended in RAW
z
burst shooting. Writing will finish faster on cards with a fast write speed.
RAW burst shooting is not available when the battery level indicator is
z
blinking.
Images may not be captured correctly if the battery runs out during image
z
processing while you are shooting in RAW burst mode with a slow-writing
card and low battery.
ISO speed cannot be set manually in
z
Auto is used.
Shutter speeds slower than 1/30 sec. are not available in
z
The camera does not autofocus as you shoot, and focus is determined by
z
the first shot.
The exposure setting for the first shot will apply to subsequent shots.
z
Picture Style, white balance, and other settings configured for the first shot
z
also apply to the next shots.
The camera does not beep during continuous shooting, regardless of the
z
[Beep] setting.
File names of RAW burst images begin with CSI_ and end with the .CR3
z
file extension.
Images are captured using the electronic shutter. Before shooting in RAW
z
burst mode, read the notes and tips about the electronic shutter ( = 148).
RAW burst image data cannot be used as-is for viewing on a computer.
z
You must first process it on this camera or use the Canon application
Digital Photo Professional.
Pressing the shutter button all the way
z
down shoots continuously until the buffer
becomes full, or until you release the
button.
,
119
, or
mode, because ISO
or
mode.
Advertisement
Table of Contents
