Advertisement
Quick Links
Corner TV Unit
Assembly Instructions
033 xx 9410
- Please keep for future reference
Dimensions
Width - 98.4cm
Depth - 38.8cm
Height - 41.6cm
MADE IN
GREAT BRITAIN
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123
Please turn to back page for important information when contacting Customer Helpline.
Rev A - 12/04/19
Advertisement
Related Manuals for JD Williams Corner TV Unit
Summary of Contents for JD Williams Corner TV Unit
- Page 1 Corner TV Unit Assembly Instructions 033 xx 9410 - Please keep for future reference Dimensions Width - 98.4cm Depth - 38.8cm Height - 41.6cm MADE IN GREAT BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123 Please turn to back page for important information when contacting Customer Helpline.
- Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assembly Do not stand or put weight on Check you have all the We do not the product, this could cause components and tools listed on recommend the damage.
- Page 3 Components - Panels Please check you have all the panels listed below Important - Thick lines indicate finished edges 622xx7002 Left drawer side (30x10cm) 1169 1171 1172 Top Panel Left End Panel Right End Panel (98.4x38.8cm) (40x26.6cm) (40x26.6cm) 623xx7002 Right drawer side (30x10cm) 9148 Plinth Panel...
- Page 4 If you have damaged or missing components, call the Components - Fittings Customer Helpline: 01709 534123 Please turn to back page for important information when contacting Customer Helpline. Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly, In some case more fittings may be supplied than are required.
-
Page 5: Exploded View
Exploded View 1169 1179 1177 1171 1173 1176 1179 1174 1175 1176 1172 1170 9148 622xx7002 624xx7029 9818 1178 623xx7002... - Page 6 Assembly Instructions Step 1 Fitting cams to the bottom panel. Insert 4 metal cams into the bottom panel 1170 1170 Note: Ensure cam arrow points towards the edge with the hole. Step 2 Fitting cams to the shelf panel. Insert 4 metal cams into the shelf panel 1175 1175...
- Page 7 Assembly Instructions Step 4 Fitting dowels to the top panel. Insert 8 metal dowels 1169 into the top panel Note: Insert metal 1169 dowels as far as shown by arrows. Do not over tighten. Step 5 Attach dowels, cams and shelf studs to left end panel.
- Page 8 Assembly Instructions Step 7 Attaching runners to the right divider. Front of Runner Position the runner so that the second hole 1174 from the front of the runner lines up with the pre-drilled hole nearest to the edge of the panel. Use screws to secure the runner.
- Page 9 Assembly Instructions Step 9 Drawer images reduced in size Insert small cams for illustration Right hand side 622xx7002 into left purposes. 623xx7002 and right 623xx7002 drawer sides. Note: Ensure cam arrow points towards the edge with hole. Left hand side 622xx7002 Insert wooden dowels in drawer back...
- Page 10 Assembly Instructions : Insert 2 metal dowels into the the drawer 1178 front 1178 : Locate the metal dowels (already inserted) in the drawer front into the small cams in the left and right hand drawer sides. Turn cams 180 degrees to lock.
- Page 11 Assembly Instructions Step 10 Connect the bottom and plinth panel to the right end panel. Ensure plinth sits Connect the cams in the flush. 1170 bottom panel the plinth panel 9148 1172 the dowels in the right 1172 end panel FINISHED EDGES TO THE FLOOR! Ensure plinth is...
- Page 12 Assembly Instructions Step 12 1174 Connect the shelf panel to the divider panels. Connect the cams in the 1175 shelf panel to the 1175 dowels in the right divider 1174 panel and the left 1173 divider panel 1173 Step 13 Secure the back rail to the divider panels.
- Page 13 Assembly Instructions Step 15 Connect the dividers and top panels to the left and right end panels and the bottom panels. 1172 1170 Connect the wooden dowels in the right divider panel and the left 1174 divider panel 1173 the middle holes in the 1174 1171 bottom panel...
- Page 14 Assembly Instructions Step 17 Attach the back panel to the unit. Slide the back panels into the grooves from the bottom and push the back panel up to the top panel. Use the panel pin guide when locating the panel pins.
- Page 15 Assembly Instructions Step 19 Locate drawers helpful hints PULL SLIDING PART OF DRAWER RUNNERS LOCATE DRAWER ONTO RUNNERS OUT SO THEY ARE FULLY EXTENDED. WHILST KEEPING RUNNERS EXTENDED. 2nd HOLE LINE UP THE FRONT HOLE IN THE DRAWER SIDE WITH THE 2ND THREADED HOLE IN THE RUNNER.
- Page 16 Assembly Instructions Congratulations! Your unit is complete. Important Information If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123 8am - 4.30pm (Monday to Thursday) 8am - 2.30pm (Fridays) (by contacting the customer service line your statutory rights are not affected) Please have the following information to hand: >>...