Table of Contents
Advertisement
FLASH RANGE - AUTOMATIC OPERATION
The camera automatically controls the flash output. For well-exposed images,
the subject must be within the flash range. Because of the optical system, the
flash range is not the same at the lens' wide-angle position as it is at the
telephoto position. The flash range can be changed with camera sensitivity
(ISO) (page 64).
Wide-angle position
0.2 m to 3.2 m (0.7 ft. to 10.5 ft.)
FLASH SIGNALS
The indicator lamp next to the viewfinder
indicates the status of the flash. When
the lamp is orange and blinks quickly,
the flash is charging and the shutter will
not release. The lamp glows steadily for
three seconds when the flash is
charged.
DISPLAY BUTTON - RECORDING MODE
The display button controls the LCD monitor display. The display cycles to the
next position each time the button is pressed: full display, live image only, and
monitor off. The monitor cannot be turned off for movie/audio recording. If the
display button is pressed and held, the LCD-brightness adjustment screen is
displayed (page 93).
Full display
Telephoto position
0.1 m to 1.8 m (0.3 ft. to 5.9 ft.)
Live image only
Display
button
44
English
Advertisement
Table of Contents
