Table of Contents
Advertisement
RECORDING MODE - BASIC OPERATION
SPOT AF
The spot AF is used for selective focusing. Both focus and exposure are
determined with the spot focus area. When auto reset (page 63) is active, the
spot AF area resets to the wide focus frame when the camera is turned off.
The spot focus area can be used with movie recording. When used with the
digital zoom (page 70), the spot focus area is enlarged.
Press and hold the center button of
the controller to display the spot
focus area; press and hold the button
again to return to the wide focus
frame. Take the picture as described
in the basic recording operation
section on page 39.
When the LCD monitor is off, the
camera cannot be switched between
wide and spot AF; the last AF mode
set is active. When the live image
only display is used, switching
between the wide and spot AF
modes resets the display mode to the
full display.
47
English
Advertisement
Table of Contents
