Setting The Flash - Sanyo VPC-T700EX Instruction Manual

Setting the Flash

Set the flash for capturing images. The flash firing mode can be set to suit for the photographic conditions.
1. Slide the mode switch to [
2. Toggle the button to select the desired flash mode.
The available flash settings in different photography modes:
Flash mode
[ Blank ] Auto Flash
[ ] Red-eye Reduction
[ ] Forced Flash
[ ] Flash Off
].
Description
The flash fires automatically to suit the photographic conditions.
Use this mode to reduce the red-eye phenomenon when you want
to capture natural-looking images of people and animals in low-light
conditions.
When capturing images, the red-eye phenomenon can be reduced
by asking the subject (person) to look at the camera or get as close
to the camera as possible.
In this mode, the flash always fires. Use this mode for photographing
under artificial light such as backlighting.
Use this mode when capturing images using indoor lighting, for
stages and indoor competitions, and when the subject is too far
away for the flash to be effective.
EN-29