Movie Editing - Sanyo Xacti VPC-A5EX Instruction Manual

MOVIE EDITING

The edit-movie option in section 2 of the
playback menu allows an unwanted
section to be cut from a movie clip. The
movie to be edited must first be displayed
in the playback mode before opening the
playback menu. Highlight "Enter" in the
movie edit option and press the center
button of the controller to open the editing
screen.
The function menu indicates the active
step in the editing procedure. The up/
down key selects functions.
Use the left/right keys of the controller to
display the first frame of the section to
be cut. The bar under the image and the
timer in the top right corner of the screen
show the approximate location of the
point.
Use the down key to select the next step.
Use the left/right keys of the controller to
display the last frame of the section to be
cut. The bar under the image and the
timer in the top right corner of the screen
show the approximate location of the
point.
Use the down key to select the next step.
Slide show –
Dissolve on
Crop frame –
Frame capture –
Edit movie –
Function menu
Find 1st frame of cut.
:function :find
Find last frame of cut
:function :find
English
86