Table of Contents
Advertisement
GETTING UP AND RUNNING
BATTERY-CONDITION INDICATOR
This camera is equipped with an automatic battery-condition indicator
displayed on the LCD monitor. The icon will change from white to red when
battery power is low.
Full-battery indicator:
The battery pack is fully charged. This
indicator is briefly displayed when the
camera is turned on or when the mode
switch is moved.
Low-battery indicator:
The battery pack is partially charged.
Low-battery warning:
Battery power is very low. The battery
pack should be replaced as soon as
possible. This red warning automatically
appears and remains on the monitor until
the battery pack is recharged. Movie
recording is not possible. If the power level
falls below this level when the camera is
on, the battery-exhausted message
appears just before the camera shuts down.
If power is insufficient for camera operation,
the indicator lamp next to the viewfinder will
turn orange and blink for three seconds. The
shutter will not release. The battery pack
must be recharged.
AUTO POWER SAVE
To conserve battery power, the camera shuts down if an operation is not
made within three minutes.
To restore power, press the shutter release button or playback button. The
length of the auto-power-save period can be changed in section 2 of the
setup menu (page 91). When the camera is connected to a computer or
PictBridge printer, the auto-power-save period is set to ten minutes and
cannot be changed.
31
English
Advertisement
Table of Contents
