Setting The Date And Time - Sanyo Xacti VPC-A5EX Instruction Manual

SETTING THE DATE AND TIME

After initially inserting a card and
battery pack, the camera's clock and
calendar must be set. When images are
recorded, the image data is saved with
the date and time of recording.
If the clock and calendar have not been
set, a message is displayed for a few
1
seconds each time the camera is turned
on. This message is also displayed if
the clock and calendar reset when the
camera is stored without battery pack
for a long period.
Set date and time.
Yes No
Use the left and right keys of the
controller 1 to select "Yes". "No"
cancels the operation.
Date/Time set
Press the center of the controller to
open the date/time setup screen.
10. 01. 2004
00 : 00
Use the left and right keys to select the
MM / DD / YYYY
item to be changed.
:move :sel. :enter
Use the up and down keys to adjust the
item.
Press the center button to set the clock and calendar.
The date/time setup screen can be opened in section 3 of the setup menu.
For customers in certain areas, the menu language must also be set. The
language is changed in section 1 of the setup menu (pages 91 and 96).
34
English