Table of Contents
Advertisement
FOCUS SIGNAL
When the shutter release button is pressed partway down, an audio signal
confirms the AF system has focused. The focus signal can be changed or
turned off in section 2 of the setup menu (page 91).
Two tones are available.
SHUTTER FX
When the shutter release button is pressed fully, an audio signal confirms that
the image was captured. The shutter signal can be changed or turned off in
section 2 of the setup menu (page 91). Two tones are available.
VOLUME
The volume of the audio signals and shutter FX can be increased or
decreased in section 2 of the setup menu (page 91). This affects the
camera's audio signals only and will not change the playback levels of an
audio track.
AUTO POWER SAVE
To conserve battery pack power, the camera shuts down if an operation is not
made within a certain period. To restore power, press the shutter release
button or playback button. The length of the auto-power-save period can be
changed in section 2 of the setup menu (page 91): 1, 3, 5, 10, and 30
minutes. The length of the auto-power-save period is fixed at 10 minutes
when the camera is connected to a computer or PictBridge printer.
96
English
Advertisement
Table of Contents
