Setting The Date And Time - Sanyo VPC-T700EX Instruction Manual

Setting the Date and Time

The date/time needs to be set if/when:
Camera is turned on for the first time.
Camera is turned on after leaving the camera without the battery for an extended period of time.
When the date and time information is not displayed on the LCD monitor, follow these steps to set the
correct date and time.
1. Slide the mode switch to [
2. Press the MENU button and select [Setup] menu with the
3. Select [Date/Time] with the
button.
The Date/Time setting screen will be displayed.
4. Select the item's field with the
for the date and time with the
The date and time is set in the order year-month-day-hour-
minute.
The time is displayed in 24-hours format.
5. After confirming all settings are correct, press the SET button.
] or [ ].
/ buttons and press the SET
/ buttons and adjust the value
/ buttons.
button.
Capture
Date/Time
2006
SET:Adj.
/ 01 / 01
20 : 00
SET:Enter
EN-21