Table of Contents
Advertisement
Removing a card
1
Confirm that the power is turned off.
œ Press the power button to turn off the camera.
œ When the power is turned off, the stand-by indicator
turns off. In addition, if the lens is protruding, it
automatically retracts and closes.
2
Make sure the accessing indicator is not flashing, then
open the card slot cover.
œ If the accessing indicator is lit or flashing, then the digital
camera is writing to the card. Never remove the card at
this time.
3
Raise the eject button.
4
Push in the eject button and remove the card.
5
Close the card slot cover.
NOTE
œ Regarding the number of images that can be stored on the card, please refer to "Possible No.
of images/possible shooting time/possible recording time" (see page 136).
œ By using the card together with a commercially available PC card adapter for CompactFlash
cards, the card can be used as a PC card conforming to PC Card Standard-ATA.
Power button
Accessing indicator
Eject button
English
28
Advertisement
Table of Contents
