Notes On Using Touch Panel; Battery Information; Caution - Sanyo VPC-E1600TP Instruction Manual

NOTES ON USING TOUCH PANEL

Touch panel is designed for operating the camera by touching the LCD monitor (touch panel) with your
finger. You can operate by directly tapping the monitor with your finger. Do not press on the LCD monitor
with hard pointed tips, such as ball pint pens.
In such situations below, even if you tap the touch panel, it won't have any reaction:
• Operate the camera when it is still in the pouch.
• Tap with your fingernail.
• Some other things were dropped onto the screen.
• Tap on the liquid crystal protection sheet. (Some liquid crystal protection sheets may impair
visibility or operability.)
Please do not:
• Operate the touch panel with wet finger.
• Press the LCD monitor too hard.
• Stick adhesive things to the touch panel.

Battery Information

• Turn off the camera before installing or removing the battery.
• Use only the provided batteries or type of battery and charger that came with your camera. Using
other types of battery or charger may damage the equipment and invalidate the warranty.
• When using Li-ion battery in this product, ensure that they are inserted correctly. Inserting the
battery upside down can cause damage to the product and possibly cause an explosion.
• When the camera is used for an extended period of time, it is normal for the camera body to feel
warm.
• Download all pictures and remove the battery from the camera if you are going to store the
camera for a long period of time.
• The type of battery and the battery power level may cause the lens to be stuck up. Ensure you
use the correct battery type and use a fully charged battery.
• Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to
the instructions.

CAUTION

• Danger of explosion if battery is incorrectly replaced.
•
Replace only with the same or equivalent type.
- SANYO Li-ion Battery, 3.7V, 700mAh, 2.6Wh
10