Nfc Module - HP EliteBook x360 1030 G4 Maintenance And Service Manual

NFC module

Table 5-8 NFC module description and part number
Description
NFC module
NOTE: The NFC module spare part kit does not include the NFC board cable. The NFC module cable is
included in the Cable Kit, spare part number L70755-001. The NFC antenna is available as spare part
number L70753-001.
Before removing the NFC module, follow these steps:
1. Prepare the computer for disassembly
2. Disconnect all external devices from the computer.
3. Remove the bottom cover (see
4. Remove the battery (see
Remove the NFC module:
1. Disconnect the NFC cable from the ZIF connector on the NFC module (1).
2. Disconnect the antenna cable from the ZIF connector on the NFC module (2).
3. Use a tool to release the NFC module from the adhesive that secures it to the computer (3), and then
remove the NFC module from the computer (4).
Reverse this procedure to install the NFC module.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 31).
29).
29).
Component replacement procedures
Spare part number
L02249-001
39