Removal And Replacement Procedures Preliminary Requirements; Tools Required; Service Considerations; Plastic Parts - HP EliteBook x360 1030 G4 Maintenance And Service Manual

4 Removal and replacement procedures
preliminary requirements

Tools required

You need the following tools to complete the removal and replacement procedures:
Nonconductive, nonmarking pry tool
●
Magnetic Phillips P1 screwdriver
●
Torx T5 screwdriver
●

Service considerations

The following sections include some of the considerations that you must keep in mind during disassembly
and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all accompanying
screws) away from the work area to prevent damage.

Plastic parts

IMPORTANT:

Cables and connectors

IMPORTANT:
the reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat
the cables during removal and insertion. Handle cables by the connector whenever possible. In all cases, avoid
bending, twisting, or tearing cables. Be sure that cables are routed so that they cannot be caught or snagged
by parts being removed or replaced. Handle flex cables with extreme care; these cables tear easily.
24 Chapter 4 Removal and replacement procedures preliminary requirements
Using excessive force during disassembly and reassembly can damage plastic parts.
When servicing the computer, be sure that cables are placed in their proper locations during