Heat Sink/Fan Assembly - HP EliteBook x360 1030 G4 Maintenance And Service Manual

Heat sink/fan assembly

Table 5-11 Heat sink/fan assembly description and part number
Description
Heat sink/fan assembly
Before removing the heat sink/fan assembly, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the system board (see
Remove the heat sink/fan assembly:
1. Remove the top screw holder from the system board by removing the screw (1) and lifting the holder
from the board (2).
2. Remove the tape from the heat sink. (1).
3. Disconnect the two fan cables from the system board (2).
4. Loosen the four captive Phillips screws that secure the heat sink (3).
5. Loosen the five captive Phillips screws that secure the fans (4).
44 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page 31).
System board on page
29).
29).
41).
Spare part number
L70756-001