Barbecook Brahma K Induction Installation Instructions Manual page 21

"POWER" and "TEMP" lights begin
to flash. After you hear a signal, the
appliance is ready for you to select
a cooking function.
WARNING:
o If nothing happens within
30 seconds after the ON/
STANDBY button was pressed,
the ON/STANDBY light will go
out and you will hear an acous-
tic signal. The appliance then
returns automatically to standby
mode. Press ON/STANDBY or
another button to start up the
appliance again.
• You can use the appliance in two
different ways:
o "POWER"
By pressing once on the "POW-
ER" button, you select the preset
power "5" and switch on the
appliance. Using the +/- buttons,
the power can be changed to a
value from 1 to 10.
OPERATING PANEL
7
8
POWER
TEMP.
TIMER
1. On/Off Switch
2. TIMER button: sets the timer/cooking time
3. TEMP button: sets the temperature (60-240 °C)
4. POWER button: sets the power (1-10)
5. Selection button (-), reduces power, temperature or cooking time
6. Selection button (+), increases power, temperature or cooking time
7. LEDs show the power, temperature or cooking time set
8. LED screen
o "TEMP" :
By pressing once on the "TEMP"
button, you select the preset
temperature of 120 °C and
switch on the appliance. Using
the +/- buttons, you can set a
temperature between 60 and
240 °C with 20 °C intervals.
• "Clock" function
After selecting the operating mode
(power or temperature), press the
"TIMER" button once. The display
shows the number "0". Using the
+/- buttons, you can set the cooking
time in 5 minute increments (up to
180 minutes). When this time is up,
you will hear a signal and the appli-
ance will go into standby mode.
o When you use the timer func-
tion, you can change the time
you have set at any moment
using the +/- buttons, without
changing the temperature or
power set. You can change the
temperature or power set with-
out affecting the timer function.
5 6
WARNING:
o If no time is set with the "TIM-
• Press the ON/OFF switch to switch
off the appliance
• Remove the plug from the socket.
• WARNING
Never put an empty pot or pan on
the hotplate. The appliance has
automatic overheating protection
which will switch your appliance off
in such an event.
4 3
POWER TEMP.
ER", the appliance will automati-
cally run for 120 minutes.
2
ON/STANDBY
TIMER
www.barbecook.com www.barbecook.com
1
21 21