1. Manuals
  2. Brands
  3. ELTEX Manuals
  4. Wireless Access Point
  5. WEP-2ac Smart
  6. User manual

ELTEX WEP-2ac User Manual

Hide thumbs Also See for WEP-2ac:
Table of Contents

Advertisement

Quick Links

Download this manual
  
         
        Wireless access point
    WEP-2ac, WEP-2ac Smart
        User manual
        Firmware version 1.18.1
IP address: 192.168.1.10
Username: admin
Password: password

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WEP-2ac and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ELTEX WEP-2ac

Summary of Contents for ELTEX WEP-2ac

  • Page 1                      Wireless access point     WEP-2ac, WEP-2ac Smart         User manual         Firmware version 1.18.1 IP address: 192.168.1.10 Username: admin Password: password...

  • Page 2: Table Of Contents

    Wall mounting ...........................12 3.5.2 Installing to false ceiling........................13 3.5.3 Removing the device from the bracket....................15 Application A. Anntenna patterns of WEP-2ас and WEP-2ac Smart ............16 Application B. Pin array of the device connectors.................17 The list of changes ..........................18   2...

  • Page 3: Introduction

    WEP-2ac and WEP-2ac Smart are Wi-Fi access points of the Enterprise class. The devices are dedicated to be installed inside buildings as access points and to create a seamless wireless network using several identical access points (Roaming) on a large area.

  • Page 4: Device Description

    The device is dedicated to create L2 wireless networks interfacing with a wired network. WEP-2ac, WEP-2ac Smart are connected to a wired network via 10/100/1000M Ethernet interface and arrange high-speed access to the Internet for devices supporting Wi-Fi technology at 2.4 and 5 GHz.

  • Page 5: Device Technical Parameters

    • centralized authorization via RADIUS server (WPA Enterprise); • WPA/WPA2; • Captive Portal; • support for Internet Protocol Security (IPSec); • support for WIDS/WIPS. The figure below shows WEP-2ac application scheme. Figure 1 – WEP-2ac application scheme 2.3 Device technical parameters Table 1 — Main Specifications...
  • Page 6   WEP-2ac, WEP-2ac Smart. User manual WAN Ethernet interface parameters Number of ports Electrical connector RJ-45 Data rate, Mbps 10/100/1000, autonegotiation Standards BASE-T Wireless interface parameters Standards 802.11a/b/g/n/ac Frequency range, MHz 2400–2483,5 MHz, 5150–5850 MHz Modulation CCK, BPSK, QPSK, 16QAM, 64QAM, 256QAM Operating channels 802.11b/g/n: 1-13 (2412–2472 MHz)
  • Page 7   WEP-2ac, WEP-2ac Smart. User manual WEP-2ac dimensions 200х40 mm WEP-2ac Smart dimensions 200х43 mm Weight 0,4 kg ¹Defined by Transmit Power Limit and Transmit Power Control regulators...

  • Page 8: Design

    The main panel layout of the device is depicted in Fig. 2. Figure 2 – Main panel layout of the device The following light indicators, connectors and controls are located on the main panel of WEP-2ac, WEP-2ac Smart: Table 2 – Description of ports and controls...

  • Page 9: Reset To The Default Settings

      WEP-2ac, WEP-2ac Smart. User manual Table 3 – Light indication of device state LED status Device state Wi-Fi   solid green Wi-Fi network is active flashing green the process of data transmission trough a wireless network LAN   solid green (10, 100 Mbps)/ solid orange (1000 Mbps)

  • Page 10: Installation Order

    Approximate radius of coverage area of WEP-2ac with a good-quality signal in case of mounting on a ceiling in typical office: 2.4 GHz 40-50 m, 5 GHz: 20-30 m. In the absence of obstacles, the coverage radius: 2.4 GHz up to 100 m; 5 GHz up to 60 m.

  • Page 11: Channel Selection For Neighboring Access Points

      WEP-2ac, WEP-2ac Smart. User manual Material Change of signal level, dB 2,4 GHz 5 GHz Organic glass -0,3 -0,9 Brick -4,5 -14,6 Glass -0,5 -1,7 Plaster slab -0,5 -0,8 Wood laminated plastic -1,6 -1,9 Plywood -1,9 -1,8 Plaster with wirecloth...

  • Page 12: Wep-2Ac, Wep-2Ac Smart Installation

      WEP-2ac, WEP-2ac Smart. User manual Similarly, the procedure of channel allocation is recommended to save for access point allocation between floors, see Figure 5. Figure 5 – Scheme of channel allocation between neighboring access points that are located between floors When width of used channel is 40 MHz there is no non-overlapping channels in frequency range of 2.4 GHz.

  • Page 13: Installing To False Ceiling

      WEP-2ac, WEP-2ac Smart. User manual   Figure 7 – Attaching the bracket to a wall a. The figure shows the bracket allocation; b. When installing the bracket, pass wires through the corresponding channels of the bracket, see figure c. Pass the wires into the corresponding grooves on the bracket while installing the bracket. Screw the brackets to the device surface by using screwdrive.
  • Page 14   WEP-2ac, WEP-2ac Smart. User manual 1 – metal bracket; 2 – armstrong panel; 3 – plastic bracket; 4 – device. Figure 9 – Mounting to a false ceiling...

  • Page 15: Removing The Device From The Bracket

      WEP-2ac, WEP-2ac Smart. User manual 1. Fasten metal and plastic bracket on a ceiling as shown in the figure 9. a. The plastic bracket (3) should be joined with the metal one (1) on the ceiling in the following order: metal bracket ->...

  • Page 16: Application A. Anntenna Patterns Of Wep-2Ас And Wep-2Ac Smart

    5 GHz  For WEP-2ac Smart in the 5 GHz band, the Smart Antenna uses the 'beam switching' method - this is more than 700 radiation patterns that dynamically change during the operation of the access point. WEP-2ac Smart constantly evaluates the location of customers and sources of radio interference, and then selects...

  • Page 17: Application B. Pin Array Of The Device Connectors

      WEP-2ac, WEP-2ac Smart. User manual 5 Application B. Pin array of the device connectors RJ-45 connector pin array The next scheme is used for twisted-pair wiring. Side А: 1. white orange; 2. orange; 3. white green; 4. blue; 5. white blue;...

  • Page 18: The List Of Changes

      WEP-2ac, WEP-2ac Smart. User manual 6 The list of changes Document version Issue date Revisions Version 1.11 01.10.2019 Synchronization with firmware version 1.18.1 Version 1.10 05.06.2019 Synchronization with firmware version 1.17.0 Version 1.9 12.02.2018 Synchronization with firmware version 1.16.0 Version 1.8...

  • Page 19: Technical Support

    +7(383) 274-47-87 +7(383) 272-83-31 E-mail: techsupp@eltex-co.ru   You are welcome to visit Eltex official website to get the relevant technical documentation and software, to use our knowledge base or consult a Service Centre Specialist in our technical forum.   http://www.eltex-co.ru/en/ http://www.eltex-co.ru/en/support/downloads/...

This manual is also suitable for:

Wep-2ac smart

Table of Contents